Showing all 10 results

Robotics

ESP WROOM 32 MCU Development Module- 38 pin

In stock

Original price was: ₹413.00.Current price is: ₹348.10. (incl Gst)
  • Ultra-low-power management.
  • 38 Pin Module
  • 4 MB Flash.
  • Current: 80 mA.
  • Supply Voltage: 2.2 V ~ 3.6 V.
  • Data Rate: 54 Mbps.
  • Frequency: 2.4 GHz.
Store:  Robodiyx
0 out of 5

ESP32 Development Board TYPE-C USB CH340C WiFi + Bluetooth Ultra-Low Power Dual Core

In stock

Original price was: ₹531.00.Current price is: ₹407.10. (incl Gst)
  1. Supply Voltage: 5V
  2. GPIO Pins: 30
  3. Connectivity: Bluetooth+WiFi
  4. Flash Memory:  4MB (32Mbits)
  5. WiFi frequency: 2.4GHz
  6. USB Type-C connector
Store:  Robodiyx
0 out of 5

ESP32 Development Board with Wifi and Bluetooth – 30 PIN

In stock

Original price was: ₹413.00.Current price is: ₹342.20. (incl Gst)
  • Model: ESP WROOM 32 MCU
  • Processor: Single or Dual core Tensilica Xtensa 32-bit LX6
  • Operating voltage (v): 2.3 ~ 3.6
  • Operating current (mA): 80
  • Small volume, easily embedded to other products
  • Strong function with support LWIP Protocol, Freertos
Store:  Robodiyx
0 out of 5

NodeMcu ESP8266 V3 Lua CH340 WiFi Development Board

In stock

Original price was: ₹206.50.Current price is: ₹194.70. (incl Gst)
  • Power Input: 4.5V ~ 9V (10VMAX), USB-powered
  • Transfer Rate: 110-460800bps
  • Support UART / GPIO data communication interface
  • Support Smart Link Smart Networking
  • Working temperature: -40°C ~ 125°C
  • Drive Type: Dual high-power H-bridge
  • Don’t need to download resetting
  • A great set of tools to develop ESP8266
  • Flash size: 4MByte
  • Lowest cost WI-FI
Store:  Robodiyx
0 out of 5

NodeMCU ESP8266 with CP2102 WiFi Development Board

In stock

Original price was: ₹365.80.Current price is: ₹324.50. (incl Gst)
  • WiFi Module: ESP-12E
  • Processor: ESP8266
  • CP2102 Chip
  • Built-in Flash: 32Mbit
  • Antenna: Onboard PCB antenna
  • Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
  • WiFi Protocol: IEEE 802.11 b/g/n
  • Frequency Range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
  • WiFi Mode: Station / SoftAP / SoftAP Station
  • Power Supply: 5V
  • Logic Level: 3.3V
Store:  Robodiyx
0 out of 5

Raspberry Pi 5 FPC Camera Cable 22-pin 0.5mm to 15-pin 1mm

In stock

Original price was: ₹165.20.Current price is: ₹141.60. (incl Gst)

FPC camera cable from Raspberry Pi with 22-pin 0.5mm pitch on one end and 15-pin 1mm pitch on the other end. It perfectly connects the Pi 5 board with the Pi Cameras.

Store:  Robodiyx
0 out of 5

Raspberry Pi HQ Camera & Lenses

In stock

Original price was: ₹6,726.00.Current price is: ₹5,723.00. (incl Gst)

Raspberry Pi High Quality Camera offers a Sony IMX477R stacked, back-illuminated sensor with higher resolution of 12 megapixels and higher sensitivity (approximately 50% greater area per pixel for improved low-light performance). The sensor is 7.9mm in diagonal and has a 1.55 μm × 1.55 μm of pixel size.

Store:  Robodiyx
0 out of 5

Raspberry Pi Pico W and Pico WH

In stock

Original price was: ₹814.20.Current price is: ₹649.00. (incl Gst)

Raspberry Pi Pico W and Pico WH (with Headers) board is based on the RP2040 microcontroller chip designed by Raspberry Pi. RP2040 is a Dual Core ARM Cortex M0+ processor with a flexible clock running upto 133 MHz with 26 multifunction GPIO pins, including 3 analog inputs.

Store:  Robodiyx
0 out of 5

Wemos D1 Mini – IOT ESP8266 Based Development Board

In stock

Original price was: ₹206.50.Current price is: ₹181.72. (incl Gst)

This is Wemos D1 Mini WIFI Internet Of Things Development Board Based ESP8266, it is a mini WIFI board based on ESP-8266EX. 11 digital input/output pins, all pins have interrupt/PWM/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) and a Micro USB connection

Store:  Robodiyx
0 out of 5

WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board

In stock

Original price was: ₹413.00.Current price is: ₹342.20. (incl Gst)

This is WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board. The WeMos D1 is an ESP8266 WiFi based board that uses the Arduino layout with an operating voltage of 3.3V.

the board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno. It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable.

Store:  Robodiyx
0 out of 5