Showing 37–48 of 151 results

Shop

ESP32 CAM Development Board – With OV2640 2 MP Camera

In stock

531.00 (incl Gst)

The ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization has a very competitive small-size camera module that can operate independently as a minimum system with a footprint of only 40 x 27 mm; a deep sleep current of up to 6mA and is widely used in various IoT applications.

Store:  Robodiyx
0 out of 5

ESP32 Development Board TYPE-C USB CH340C WiFi + Bluetooth Ultra-Low Power Dual Core

In stock

Original price was: ₹531.00.Current price is: ₹407.10. (incl Gst)
  1. Supply Voltage: 5V
  2. GPIO Pins: 30
  3. Connectivity: Bluetooth+WiFi
  4. Flash Memory:  4MB (32Mbits)
  5. WiFi frequency: 2.4GHz
  6. USB Type-C connector
Store:  Robodiyx
0 out of 5

ESP32 Development Board with Wifi and Bluetooth – 30 PIN

In stock

Original price was: ₹413.00.Current price is: ₹342.20. (incl Gst)
  • Model: ESP WROOM 32 MCU
  • Processor: Single or Dual core Tensilica Xtensa 32-bit LX6
  • Operating voltage (v): 2.3 ~ 3.6
  • Operating current (mA): 80
  • Small volume, easily embedded to other products
  • Strong function with support LWIP Protocol, Freertos
Store:  Robodiyx
0 out of 5

ESP32 Development Board with Wifi and Bluetooth – 30 PIN

In stock

330.40 (incl Gst)
  • Model: ESP WROOM 32 MCU
  • Processor: Single or Dual core Tensilica Xtensa 32-bit LX6
  • Operating voltage (v): 2.3 ~ 3.6
  • Operating current (mA): 80
  • Small volume, easily embedded to other products
  • Strong function with support LWIP Protocol, Freertos
Store:  Robodiyx
0 out of 5

Ethernet and PoE Shield for Arduino – W5500 Chipset

In stock

3,386.60 (incl Gst)

The Ethernet and PoE Shield for Arduino with the W5500 chipset supports PoE power supply, hardware TCP/IP, and 8-channel sockets. It ensures efficient data transfer and integrates seamlessly with Arduino.

  • Support hardware TCP/IP protocol: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
  • Support 8-channel independent Sockets
  • Support WOL Wake-on-LAN
  • Internal 32KB for TX/RX buffer
  • On-board level converter circuit
  • Gravity 3Pin ports for connecting sensors
  • Stable Wired Network
  • Power Over Ethernet (PoE)
  • Plug-and-Play with Arduino
  • Built-In TCP/IP Stack
  • Compact & Durable Design
Store:  Robodiyx
0 out of 5

EZ-USB FX2LP CY7C68013A USB Development Board Logic Analyzer

In stock

Original price was: ₹601.80.Current price is: ₹572.30. (incl Gst)
  1. High-Speed USB2.0 specification at 480Mbps, compatible with USB 1.1
  2. USB2.0 Core, high speed 8051 core, 16K RAM.
  3. Built-in IDE interface for IDE devices
  4. Powered by USB Port
  5. Compact Design
Store:  Electro Semi
0 out of 5

Fire or Flame Sensor Module

In stock

Original price was: ₹40.12.Current price is: ₹33.04. (incl Gst)
Features :
  • High Photo Sensitivity
  • Fast Response Time
  • Sensitivity adjustable
  • Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
  • Detection range: up to 100 cm.
  • Adjustable detection range.
  • Detection angle about 60 degrees, it is sensitive to the flame spectrum.
  • Comparator chip LM393 makes module readings stable.
  • Operating voltage 3.3V-5V.
  • Digital and Analog Output.
  • Power indicator and digital switch output indicator.
Store:  Robodiyx
0 out of 5

GY-273 HMC5883L Triple Axis Compass Magnetometer Sensor Module

In stock

265.50 (incl Gst)

The GY-273 module is based on the Honeywell HMC5883LIC for low-field magnetic sensing with a digital interface for applications such as lowcost compassing and magnetometry. The HMC5883L includes state-of-threat, high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification; automatic degaussing strap drivers, offset cancellation, and a 12-bit ADC that enables 1 to 2 compass heading accuracy. The I2C serial bus allows for an easy interface.

Store:  Robodiyx
0 out of 5

HC-SR04 Ultrasonic Distance Sensor Module

In stock

Original price was: ₹70.80.Current price is: ₹61.36. (incl Gst)
  • Working Voltage:5V (DC)
  • Static Current: Less than 2mA
  • Output Signal:5V
  • Sensor Angle: Less than 15 Degrees
  • Detection Distance: 2 cm to 450 cm
  • High Precision: Up to 2 mm
  • Input Trigger Signal: 10µs TTL impulse
  • Echo Signal: Output TTL PWL Signal
  • High sensitivity ultrasonic range sensor
  • Works with Arduino board
Store:  Robodiyx
0 out of 5

HFS-DC06 5.8G DC5V Microwave Motion Sensor Module for LED Lighting Doppler Effect

In stock

Original price was: ₹521.56.Current price is: ₹497.96. (incl Gst)
  1. Model: HFS-DC06
  2. Frequency: 5.8GHz
  3. Waveband: ISM band
  4. Input Voltage: 5V(Stable)
  5. Minimum Input Current: 22 .4mA
Store:  Electro Semi
0 out of 5

HLK 1D0505 (B0505S-1WR3) Power Supply Module

In stock

Original price was: ₹96.76.Current price is: ₹81.42. (incl Gst)

B_S-1WR3 series is a small size, high-efficiency micro power, constant voltage, input isolation and unregulated, single output DC/DC power supply module provided by Hi-link to customers; this series of products are specially designed for the needs of on-board power supply systems. Designed for applications that generate a set of voltages isolated from the input power supply.

Store:  Robodiyx
0 out of 5