Showing 25–36 of 151 results
CNC Shield V3 Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
In stock
₹141.60 (incl Gst)- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
DHT-11 Digital Temperature And Humidity Sensor
In stock
Original price was: ₹182.90.₹172.28Current price is: ₹172.28. (incl Gst)- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
- Temperature measuring range: 0~+50degree.
- Humidity measurement accuracy: ±5.0%RH.
- Temperature measurement accuracy: ±2.0degree.
- Low power consumption.
- Relative humidity and temperature measurement
- All calibration, digital output
- Excellent long-term stability
DHT11 – Temprature and Humidity Sensor Module
In stock
Original price was: ₹66.08.₹56.64Current price is: ₹56.64. (incl Gst)Specifications:-
- Power Supply： 3.3~5.5V DC
- Output： 4 pin single row
- Measurement Range： Humidity 20-90%RH， Temperature 0~50℃
- Accuracy： Humidity +-5%RH， Temperature +-2℃
- Resolution： Humidity 1%RH， Temperature 1℃
- Interchangeability： Fully Interchangeable
- Long-Term Stability： <±1%RH/year
Â
DHT22/AM2302 Digital Temperature & Humidity Sensor
In stock
Original price was: ₹182.90.₹171.10Current price is: ₹171.10. (incl Gst)- Ultra-Low Power.
- No Additional Components.
- Long Distance Signal Transmission.
- All Calibration, Digital Output & Completely Interchangeable.
- Relative Humidity & Temperature Measurement.
- Humidity Measurement Precision: ±2-5% RH.
- Temperature Measurement Precision: ±0.5 deg C.
Digital PWM Generator with Display
In stock
₹672.60 (incl Gst)This is a PWM generator, which is housed in a protective shell. It can generate a PWM frequency from 1Hz to 150KHz. This device can be used where an accurate and reliable source of PWM is required.
- Bright LCD Display
- Supports UART
- Adjustable Frequency Output
- High Accuracy Detection
- Supporting Power-OFF Memory Function
- Supports Duty Cycle Adjustment
DS211 Mini Pocket Portable Oscilloscope
In stock
₹8,378.00 (incl Gst)The DSO series oscilloscope is an Open Hardware pocket-size compatible 32bit digital storage oscilloscope, it based on ARM -M3, equipped with 320 x 240 colour display, SD card, USB port and recharging function. Its compact, simple to operate; meets the basic demands of school lab, electric furniture repairment and electric engineering. As all the hardware/firmware are open for hackers, It can be also a good STM32 platform for hackers DIY Projects.
Dual ETH Quad RS485 Base Board (B) For Raspberry Pi Compute Module 4, Gigabit Ethernet, 4CH Isolated RS485, USB2.0
In stock
₹5,310.00 (incl Gst)Waveshare’s Dual ETH Quad RS485 Base Board (B) expands Raspberry Pi Compute Module 4 with dual Gigabit/100M Ethernet, 4 isolated RS485, HDMI, CSI, and USB.
DWIN- 5.0 Inch 800×480 HMI LCD Display Capacitive Touch, 16MB Flash, Buzzer, RTC, SD Interface, TTL/RS232 (Industrial Grade)
In stock
₹4,307.00 (incl Gst)Industrial-grade 5.0″ HMI LCD display with capacitive touch, 800×480 resolution, 16MB Flash, SD card, TTL/RS232, RTC, and easy-to-use GUI development software.
ESP WROOM 32 MCU Development Module- 38 pin
In stock
Original price was: ₹413.00.₹348.10Current price is: ₹348.10. (incl Gst)- Ultra-low-power management.
- 38 Pin Module
- 4 MB Flash.
- Current:Â 80 mA.
- Supply Voltage:Â 2.2 V ~ 3.6 V.
- Data Rate:Â 54 Mbps.
- Frequency:Â 2.4 GHz.
ESP-01 ESP8266 Serial WIFI Transceiver Module
In stock
Original price was: ₹153.40.₹129.80Current price is: ₹129.80. (incl Gst)The ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost-effective board with a huge, and ever growing, community.
ESP-12E ESP8266 WiFi Wireless IoT Board Module
In stock
Original price was: ₹147.50.₹123.90Current price is: ₹123.90. (incl Gst)- Communication Interface Voltage: 3.3V
- Working Current: 240mA(MAX)
- Serial Port Baud Rate: 115200 (Default), can be modified to other values by AT command
- Serial Communication Format: 8N1
- Wireless Network Mode: Station / SoftAP / SoftAP station
- Wireless Criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- 19.5dBm output power
ESP-12F ESP8266 WiFi Wireless IoT Board Module
In stock
₹110.92 (incl Gst)- Communication Interface Voltage: 3.3V
- Working Current: 240mA(MAX)
- Serial Port Baud Rate: 115200 (Default), can be modified to other values by AT command
- Serial Communication Format: 8N1
- Wireless Network Mode: Station / SoftAP / SoftAP station
- Wireless Criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- 19.5dBm output power
Semiconmart is registered in India | Registered Office: Unit No-01, First Floor, Plot No-18, Gangapuram, Hapur Road, Ghaziabad, Uttar Pradesh- 201013